Dedicated Mircros Digital Sprite 2 Guia de Configuração descarregar pdf (Página 3)

DS2 Network Guide

Network Conguration

This manual is designed to help with the advanced conguration of the unit using the on-board web

pages.

To assist with the conguration of the unit, sections are constructed as tutorials and will illustrate

how to perform common requirements. Use the tutorials that will provide the required functionality

and follow the step by step instructions.

In some of the sections the web interface and the OSD menus will be displayed. These are the more

advanced network settings where conguration via the web pages is more appropriate.

This manual will be divided into:

Simple Conguration –required to get the unit up and running

Advanced Conguration –project specic requirements

Software No 04.4(019) M2IP-03.1 (09.2)

Note: The unit should be congured in line with the main conguration steps detailed in the Setup

Guide and therefore the cameras inputs have been enabled and the standard record rate

has been set.

Web Page Icons

Each of the unit conguration web pages has the following buttons:

Reset to Defaults –This will return the associated page to factory defaults.

Display Help –This will display the Help pages for the associated conguration page. This is a good

starting point if you are having problems or do not understand the conguration parameters.

Save Settings –This will save a changes that has been made to the conguration page - remember

to save the changes.

NOTE: Selecting a new page before saving the changes will result in any changes being lost!

Reset –This is displayed on conguration pages that require a unit reset to initiate a function.

Note: Always save the settings before resetting the unit.

Each ‘How to.. Section’ will show the Tab and Function name to allow easy location of the correct

conguration page.

1 2 3 4 5 6 7 8 ... 129 130

Sem comentários

Dedicated Mircros Digital Sprite 2 Guia de Configuração Página 3